Filter
Top Products
Oven Control Settings
AUTO SELF CLEAN
Press this pad to select the self-cleaning function. See
the
Using the self-cleaning oven
section.
NOTE: Do not lock the oven door with the latch during cooking. The latch is used
for self-cleaning only.
BROIL HI/LO Pad
Press this pad to select the broil function.
BAKE Pad
Press this pad to select the bake function.
+ and – Pads
These pads allow you to set times up to 9 hours
and 55 minutes. Short taps to these pads change
the time or temperature by small amounts. Press
and hold the pad to change the time or temperature
by larger amounts.
Display
Shows the time of day, oven temperature, whether the
oven is in the bake, broil or self-cleaning mode and the
times set for the timer on automatic oven operations.
CLEAR/OFF Pad
Press this pad to cancel
ALL
oven operations except the
clock and timer.
If “F–and a number” flash in the display and the oven control signals,
this indicates a function error code. If the function error code appears
during the self-cleaning function check the oven door latch—the latch handle
may have been moved, even if only slightly, from the latched position.
Make sure the handle is to the right as far as it will go. Press the
CLEAR/OFF pad. Allow the oven to cool for one hour. If the function error
code repeats, disconnect the power to the range and call for service.
5
6
7
8
9
10
Troubleshooting TipsInstallation Instructions Customer ServiceOperating InstructionsSafety Information
17