Filter
Top Products
Using the self-cleaning oven.
Never force the latch handle. Forcing the handle will damage the door
lock mechanism.
26
Operating Instructions
Installation Instructions
Safety InformationTroubleshooting TipsCustomer Service
How to Set the Oven for Cleaning
Latch the door.
Press the
AUTO SELF CLEAN
pad.
Using the
+
or
–
pad, enter the desired clean time.
Clean cycle time is normally 3 hours. You can change
the clean time to between 2 hours and 4 hours,
depending on how dirty your oven is.
The self-clean cycle will automatically begin after
CLEAN
is displayed and the time for the clean cycle is set. The
words
ON
and
LOCK
will appear in the display. It will not
be possible to open the oven door until the temperature
drops below the lock temperature and the
LOCK
light
goes off.
When the
LOCK
light is off, slide the latch handle to the
left as far as it will go and open the door.
■ The word
door
will be displayed, the word
LOCK
will
flash and the oven control will signal if you set the
clean cycle and forget to close the oven door.
■ To stop a clean cycle, press the
CLEAR/OFF
pad. When
the
LOCK
light goes off and the oven has cooled below
the locking temperature, open the door.
3
2
1
or