Filter
Top Products
Before you call for service…
Troubleshooting Tips
Operating Instructions
Installation Instructions
Safety Information
Troubleshooting TipsCustomer Service
Problem Possible Causes What To Do
Electric Coil Models
Surface units
The surface units are • With the controls off, check
not functioning
not plugged in solidly. to make sure the surface
properly
unit is plugged completely
into the receptacle.
The surface • Check to see the correct
unit controls control is set for the surface
improperly set. unit you are using.
The drip pans are • With the controls off, check
not set securely in to make sure the drip pan is
the cooktop. in the recess in the cooktop
and that the opening in the
pan lines up with the
receptacle.
Cooktop feels hot
Large pans hold heat • Choose a pan that matches
close to the cooktop. the size of the surface unit
you are using.
The oven vent is blocked. • Pans on the right rear
surface unit block air flow
from the oven vent and
cause the cooktop to
get hot.
Oven
Oven light does not work
Light bulb is loose •Tighten or replace
or defective. the bulb.
Switch operating light •Call for service.
is broken.
Control signals after
You forgot to enter •Press the
CLEAR/OFF
pad
entering cooking time
a bake temperature. and begin again.
or start time
52