Filter
Top Products
5
Delay Hour Option
This option allows you to delay the start of a wash cycle for up to 24 hours.
With the door open, turn the dishwasher ON by pressing the ON/OFF button; then press DELAY HOURS button to
choose the number of hours you want to delay the start of the wash cycle. The hours will show in the display
window.
N
OTE: To cancel the DELAY HOURS option before the start of the cycle, repeatedly press the DELAY HOURS button
until the display is blank or reads “00.”
Starting a Cycle
After selecting the wash cycle (Step 2) and delay hours (Step 3), if desired, close the door of the
dishwasher to start the cycle or begin the DELAY HOURS countdown. When the cycle starts, the
drain begins and approximately 60 seconds later the water fill begins.
Status Indicators
LOW RINSE AID T
he red light will display when the rinse aid dispenser needs to be refilled with liquid rinse aid.
Use of
Jet-Dry
®
or
Cascade Crystal Clear
®
rinse agent removes spots and prevents new
film buildup on your dishes, glassware, flatware, cookware and plastics. See page 6 for
instructions on refilling the rinse aid dispenser.
CLEAN
The green light will display and a beep will sound to alert you that the wash cycle is complete.
5
4
3
ge.com
Consumer Support
Operating Instructions
Safety Instructions Care Instructions Troubleshooting Tips