CONSUMER SAFETY INFORMATION
THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY.
THIS APPLIANCE HAS NO USER-SERVICEABLE PARTS. THIS PRODUCT SHOULD ONLY
BE SERVICED BY AN AUTHORIZED SERVICE REPRESENTATIVE.
Extension Cord
A short power supply cord is provided to reduce the risk resulting from becoming
entangled in or tripping over a longer cord. An extension cord may be used if care
is exercised in use. If an extension cord is used, the marked electrical rating of the
extension cord should be at least as great as the electrical rating of the skillet. The
extension cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over unintentionally.
Electrical Power
If electric circuit is overloaded with other appliances, skillet may not operate
properly. Skillet must be operated on separate circuit from other operating
appliances.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions before using.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse temperature control probe,
cord or plugs in water or other liquid.
4. Close supervision is necessary when any appliance is used near children. This
appliance is not to be used by children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts, and before cleaning.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Call Customer
Service(see warranty) to return for examination, repair, or adjustment.
7. The use of accessory attachments not recommended by manufacturer may
cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch heated surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving any appliance containing hot oil
or other hot liquids.
12. Always attach Temperature Control Probe to appliance first, then plug cord in
the wall outlet. To disconnect, turn control to "OFF", allow appliance and
control probe to cool, then remove plug from wall.
13. Do not use appliance for other than intended use.
E2
E3
SAVE THESE INSTRUCTIONS (CONT'D)
Polarized Plug
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit into a polarized outlet only one
way. If plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to modify the plug in any way.
Warm Setting
The temperature control probe has a “Warm” range setting of approximately 150°F
to 180°F. The indicator light will cycle on and off when this setting is in use to
indicate that the skillet is maintaining the desired temperature.
Parts and Features
1
2
3
4
5
Cool Touch Lid
Glass View Window
Lid Handle
Steam Vent
Handles/Legs
Temperature Control Probe*
*NOTE: Only use with the Temperature Control
Probe model that is marked on the bottom of the
temperature control probe guard.
6
1
2
3
5
5
6
4
16915607ESM1.qxd 5/31/07 9:41 AM Page 3