Filter
Top Products
Client: AirLux (Wal*Mart)
Project: 169169
Language: EN
Date: 29.12.2007
Version: 09
Page: 6 (of 18 pages)
Barcode: 690 5020 10 000 6 00226
OPERATION
Before first use
• Remove all packaging materials, labels and/or stickers from your blender.
• Clean your blender thoroughly before using for the first time ( Cleaning).
WARNING: Do not immerse the base (16) in water or any liquids (ill.
g
). This may cause
electric shock or damage the appliance.
Operating instructions
Before plugging in the blender, check that the electrical circuit is not overloaded with
other appliances.
• Set the base (16) on a flat, even and steady surface.
• Put the prepared ingredients into the glass jar (21) (ill.
a
). Cover the jar (21) with
the lid (23) (ill.
b
). Make sure that the mouth (22) of the jar (21) is firmly covered by
the lid (23).
• Insert the ingredient cap (24) into the hole of the lid (23). Turn clockwise to
lock in place (ill.
c
).
Tip: Add liquid ingredients into the jar (21) first before adding pieces. This way all
ingredients are mixed evenly. Cut solid food into approximately 0.5 inch (1.3 cm) to
1 inch (2.5 cm) cubes in order to get the best result. Cut cheese into pieces no larger
than 0.5 inch (1.3 cm).
WARNING: Do not fill the jar (21) with any hot liquid or run the appliance empty (ill.
h
).
Do not rinse the glass jar (21) with hot water after making cold food.
• Put the glass jar (21) onto the base (16) (ill.
d
). Fit the pitcher base (17) onto the top
of the base (16).
• Insert the plug (15) into the wall outlet. The ON/OFF button (1) illuminates. The
blender is on stand-by.
• Press the ON/OFF button (1) to switch on the blender. The high speed indicator (7)
illuminates, indicating the blender is ready to start working.
• Select and press the desired function button. There are 10 function buttons. For
some functions the blending speed can be alternated between high speed and low
speed. Press the high speed button (8) or the low speed button (9). Refer to the
( Blending table) to make the selection.
Tip: Operate the blender for a short time only. Press the ON/OFF button (1) once the
right consistency is reached.
6