Filter
Top Products
OPERATION
Manually interrupt the boiling process by lifting up the I/0 switch (7) to off position
(ill.
g
).
After each use remove the power plug (6) from the wall outlet (ill.
h
).
WARNING: The appliance is very hot during use. Do not touch (ill.
i
). Danger of
burns!
WARNING: Never leave the kettle unattended while boiling water. Especially when there
are children nearby.
CLEANING
Clean the kettle regularly. This appliance contains no user serviceable parts and requires
little maintenance. Leave any servicing or repairs to qualified personnel.
Clean the outside of the base (9) and the kettle with a damp soft cloth.
Clean the inside of the kettle with dishwasher detergent and rinse thoroughly with
water.
Do not use abrasive cleansers.
After cleaning dry the kettle and the base (9) thoroughly.
WARNING: Never immerse the kettle (ill.
j
) or the base (9) (ill.
k
) in water or other
liquids.
DECALCIFYING
Remove the filter (1).
Fill the kettle with a vinegar and water mixture (½ vinegar and ½ water) up to the
max 1.7 mark.
Open lid (2) and pour water into the kettle (ill.
a
).
Close the lid (2) and place the kettle on the base (9).
Insert power plug (6) into a standard 120 V AC wall outlet (ill.
d
). Press down the
I/0 switch on/off (7) to start boiling the water (ill.
e
).
Run through the complete brewing cycle with the decalcifying solution and repeat
3 times.
After decalcifying, run through 2 complete boiling cycles with clear water.
Clean the kettle afterwards ( Cleaning).
•
•
•
•
•
•
•
•
•
•
•
•
•
•
7
169205-EN-04.indd 7 4/27/2009 2:40:09 PM