5.4 Transfer Freezer Door Handle
5.4.1 Remove the screw
holding the handle
to the top of the
door and the two
screws holding the
KDQGOHWRWKHERWWRP
of the door.
5.4.2 Remove the handle.
Installation Instructions
TOP
BOTTOM
Top
Bottom
16
6.1.2 Insert the pin on the center hinge into the socket in the
top of the door. Place the spacer, then the washer, on
the hinge pin.
NOTE: The center hinge must
EHWXUQHGRYHUDVVKRZQZKHQ
mounted on the left side.
Plastic Washer
and Spacer
Hinge Pin
6.2 Re-hang the freezer door
6.2.1 Lower the freezer door
onto the center hinge
pin. Be sure the
washer and spacer
are in place on the pin.
RE-HANGING THE DOORS (CONT.)
6
Center Hinge Pin
Plastic Washer
and Spacer
REVERSING THE DOOR SWING (CONT.)
2
6.1.3 7LOWWKHGRRUWRZDUGWKHFDELQHW$VWKHGRRULVEURXJKW
into position, slide the hinge under the head of the screw
ZKLFKHDUOLHUKDGEHHQSDUWO\GULYHQLQWRWKHRXWHUPRVW
KROH,QVHUWWKHUHPDLQLQJVFUHZWKHQWLJKWHQERWK
screws securely.
5.4.3 Remove the screw from the
right top edge of the door
and insert it into the handle
screw hole on the left side.
5.4.4 Transfer the door stop as shown in preceding
section 5.2.
5.4.5 Attach the handle to the
right edge of the door with
VFUHZVDWWRSDQGERWWRP
XVLQJERWWRPKROHVYDFDWHG
E\UHPRYDORIWKHGRRUVWRS
screws.
6.1 Re-hang the fresh food door
6.1.1/RZHUWKHIUHVKIRRGGRRURQWRWKHERWWRP
hinge pin. Be sure the washer is in place on
the pin.
RE-HANGING THE DOORS
6
Plastic
Washer
Hinge
Bracket
6.2.2 7LOWWKHGRRUWRZDUGWKHFDELQHWOLIWLQJWKHWRSKLQJHVR
WKHSLQ¿WVLQWRWKHVRFNHWRQWKHWRSRIWKHGRRU
6.2.3. 0DNHVXUHWKHGRRULVVOLJKWO\DERYHWKHWRSRIWKH
FDELQHWDQGWKHJDSEHWZHHQWKHGRRUVLVHYHQ
across the front. Tighten the top hinge screws. Do not
overtighten these screws–tighten them until they are
just snug, then turn them another one-half turn.
REVERSING THE DOOR HANDLES (CONT.)
5