GE 49-8549 Range User Manual


 
H
OW
to Set Delay Start of Cleaning
(on some models)
(@ick Reminder:
1.
Latch
the door.
2. Turn the Oven Temperature Control knob to
AUTO
SELF CLEAN.
3.
Press the START TIME ON/OFF pad.
4.
Press
the HOUR
and
L41N.
pads to set the
time
of day you want cleaning to start. The
Self-Clean Cycle will automatically begin
at
the time
yoLl
selected.
Dejay
Start is setting the oven timer to start the clean
cycle
automatically at a later time than the present
time
of
day.
For example: Let’s say it is
7:00
and you want the
oven to begin self-cleaning at
9:00
after you re
finished in the kitchen. The oven is just soiled a
normal amount so the normal Clean Time of 4 hours
and
20
minutes is preferred.
1.
Follow steps
to
prepare the oven for cleaning.
2.
Slide
the
latch
handle to the
right
as
far
as
it w
ill
go.
Never force the latch
handle.
Forcin~
the
s
3. Turn the Oven Temperature knob to the AUTO
SELF CLEAN position.
(—>
4. Press the START TIME ON/OFF pad.
D
%YiT
ONIOFF
A
HOUR
v
5. Press the HOUR pad until
9:()()
appears in
the display. The timer is
now’
set to start
cleaning in 2 hours. at
9:00.
The Self-C’lean Cycle will be set to
automatically begin at
9:00
and finish
at 1
:20.
Both the OVEN ON
liszht
and the
LATCH DOOR light
~ill flash when
the Clean Time is finished.
6. When the LATCH DOOR light flashes, slide the
latch handle to the left
as
far as it will go, turn
the
Oven Temperature knob to OFF and open the door.
Never force the latch handle. Wait until the LATCH
DOOR light flashes and the latch slides easily.
Forcing the latch handle may damage the door
lock.
(cl)ntin[{t’d tlt
t
1
pa qc
)
handle will damage the
door lock mechanism.
Ul\*
2’7