Filter
Top Products
7
Customer ServiceTroubleshooting Tips
Operating InstructionsSafety Instructions
Installation Instructions
Preparing to install the refrigerator.
Leveling Legs
(on some models)
Adjustable legs
at the front corners of the
refrigerator should be set so the refrigerator is firmly
positioned on the floor and the front is raised just
enough that the door closes easily when opened
about halfway.
To adjust the leveling legs,
turn the legs
counterclockwise to raise
the refrigerator,
clockwise to lower
it.
Read these instructions completely and carefully.
Refrigerator Location
■ Do not install the refrigerator where the
temperature will go below 50°F (10°C) because
it will not run often enough to maintain proper
temperatures.
■ Install it on a floor strong enough to support it
fully loaded.
■ If the Model 2 is placed on a countertop or stand,
the front surface of the door should be 3″ or
more back from the edge of the countertop or
stand to avoid accidental tipping of the appliance
during normal use.
■ Do not install it closer than 5″(13 cm) next
to a range.
■ Do not install it in a recessed area.
■ Do not build in the refrigerator.
Clearances
Allow the following clearances for ease of
installation and proper air circulation.
Sides 1/2″ (13 mm)
Top 2″ (51 mm)
Back 2″ (51 mm) from the rear cabinet surface
to the wall
Turn counterclockwise to raise,
clockwise to lower.