Filter
Top Products
10
Operation
Normal Operation Mode (continued)
Final Rinse
Pressure
Wash
Temperature
Final Rinse
Temperature
WINSTON-SALEM,NC
CHAMPION INDUSTRIES, INC.
10
0
30
20
PSI
60
50
40
0
20
40
60
80
100
120
140
160
180
200
220
100
80
60
40
20
0
20
40
60
80
100
120
140
160
180
200
220
100
80
60
40
20
20-25 PSI
150°F/66°C
180-195°F
82-91°C
12. Opening the door when the dishwasher is in-cycle will stop the dishwasher. The cycle will resume
automatically when the dishwasher door is closed.
13. The nal rinse cycle begins at the end of the wash cycle and runs for approximately 12-seconds.
14. Check the FINAL RINSE temperature gauge during the nal rinse and make sure that it indicates a
minimum of 180ºF/82ºC. The acceptable range of operation is 180-195ºF/82-91ºC.
15. Check the pressure gauge located at the top of the dishwasher to ensure that the final rinse
pressure maintains a flowing pressure between 20-25 PSI.
16. At the end of the rinse cycle, the in-cycle light will go out. Open the door and remove the clean
rack of wares. Repeat steps 8-15 for additional dish racks.
17. Refer to the Automatic Drain Cycle on the next page for the procedures to drain the dishwasher.
The pressure gauge is located at the top of the dishwasher. The wash temperature gauge and
the final rinse temperature gauges are located on the front of the control cabinet.