GE FUF14S Freezer User Manual


 
This electronic temperature control is located on
the front of the freezer door. The temperature is
factory-preset to provide satisfactory food
storage temperatures. To adjust the temperature
setting, press Colder to decrease temperatures
and Warmer to increase temperatures. Allow
several hours for the temperature to stabilize
between adjustments.
To turn the freezer off, press Warmer until the
display reads “0.” To turn the freezer on, press
Colder until the display shows “4” or the desired
setting.
To lock the controls, press Alarm Reset for
3 seconds. The display will read “L.” To unlock
the controls, press Alarm Reset for 3 seconds.
The display will read “U” and then display
the current temperature.
This electronic control has a temperature
alarm feature. If the inside temperature
exceeds 23°F. An alarm will sound if the
freezer temperature reaches unsafe levels.
The alarm operates on household electricity.
If the power fails, the alarm will not perform.
When the freezer is initially plugged in, the
red Hi Temp light will come on and a buzzer
will sound. The indicator light will stay on until
the freezer temperature reaches 23°F or
below. To silence the buzzer, push Alarm
Reset. If the temperature in the freezer goes
above 23°F for any reason, the Hi Temp light
will come on and the buzzer will sound every
hour until the temperature is below 23°F. To
silence the buzzer, push Alarm Reset.
If an “E” appears on the display, contact your
authorized service technician for repair. The
freezer will continue to run until serviced.
Consumer SupportTroubleshooting Tips
Operating Instructions
Safety Instructions
Installation
Instructions
About the operation of your freezer. ge.com
Starting the Freezer
Clean the inside of the freezer with a mild solution of baking soda and water (see Care and Cleaning).
Connect cord to power outlet.
On models with a Temperature Monitor or High-Temp Alarm Switch, set the switch to the OFF position.
Make sure the temperature control is set at 4.
Allow freezer to operate for at least four hours before placing food inside.
On models with a Temperature Monitor or High-Temp Alarm Switch, set the switch to the ON position.
6
5
4
3
2
1
5
Electromechanical Temperature Control (Chest and some Upright models)
The electromechanical temperature control
is preset to give satisfactory food storage
temperatures. It is adjustable to provide a
range of temperatures. Allow several hours
for the temperature to stabilize between
adjustments.
The electromechanical temperature control is
on the outside left on the chest models and
inside the freezer on upright models.
Temperature Control
For safe food storage, allow 4 hours for the
freezer to cool down completely. The freezer
will run continuously for the first several
hours. Foods that are already frozen may be
placed in the freezer after the first few hours
of operation. Unfrozen food should NOT be
placed in the freezer until it has operated for
4 hours. Allow several hours after each one-
step adjustment for the freezer temperature
to stabilize.
When loading the freezer, freeze only
3 pounds of fresh food per cubic foot of
space at a time. Distribute packages evenly
throughout the freezer. It is not necessary to
turn the control knob to a colder setting while
freezing food.
Turning the control to OFF stops the cooling
process but does not shut off power to the
freezer.
Electronic Temperature Control (some Upright Frost-Free models)