GE JRP20 Oven User Manual


 
18
Safety Instructions
Operating Instructions
Care and CleaningTroubleshooting TipsConsumer Support
Using the self-cleaning oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
Touch the SELF CLEAN pad.
Using the + or pad, enter the
desired clean time.
Touch the DELAY START pad.
Using the + or pad, enter the time
of day you want the clean cycle to
start.
Touch the START pad.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the LOCKED DOOR
light goes off.
When the LOCKED DOOR light is off, open
the door.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with a
soap-filled scrubbing pad and rinse thoroughly
with a vinegar and water mixture.
These deposits are usually a salt
residue that cannot be removed by
the clean cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
You cannot set the oven for cooking
until the oven is cool enough for the
door to unlock.
If the shelves become hard to
slide, wipe the shelf supports with
cooking oil.