Filter
Top Products
10
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this to use
the Centigrade selections.
1. Press BAKE and BROIL HI/LO
at the same time for 2 seconds
until the display shows “SF.”
2. Press BROIL HI/LO. The display
will show “F” (Fahrenheit).
3. Press BROIL HI/LO again. The display
will show “C” (Centigrade).
4. Press START.
START
BROIL
HI/LO
BROIL
HI/LO
BROIL
HI/LO
BAKE
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time or temperature, you may
notice the display changes slowly. This special feature allows you to change
the speed. To set the speed you prefer, follow the steps below.
1. Press BAKE and BROIL HI/LO at the same time for
2 seconds until the display shows “SF.”
2. Press the + pad. The display will show you a set speed
between 1 and 5.
3. Press the + pad to increase the speed up to the number 5.
—Press the – pad to decrease the speed down to the number 1.
4. Press START to activate the setting and leave the
control set in this special features mode.
START
BROIL
HI/LO
BAKE
SPECIAL FEATURES
OF YOUR OVEN CONTROL
(continued)