Filter
Top Products
Energy Options
HI TEMP Provides extra heat for best performance. It is used
WASH best with heavily-soiled dishes.
HI TEMP RINSE
Turns on the heater in final rinse cycles to help
prevent spotting on dishware. This option may be
turned
ON
or
OFF
during the wash cycle.
HEATED DRY ON/
Turns the drying heater on for fast drying. This
HEATED DRY cycle will extend the time to your wash cycle.
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Control Settings
Cycles
POTS & PANS For heavily soiled dishes or cookware with dried-on
or or baked-on soils. Everyday dishes may be included.
HEAVY WASH This cycle will not remove burned-on foods.
HOT START Preheats wash water to correct temperature.
NORMAL WASH For loads of everyday dishes, glasses and cookware
with medium soils.
NOTE:
Many dishes have lighter
soil than normal. Choosing a cycle other than
NORMAL WASH
will save energy and water.
LIGHT WASH For dishes with light soils.
CHINA CRYSTAL For lightly soiled china and crystal.
SHORT WASH For quickly washing loads of everyday dishes with
medium soils that have not dried on, such as loads
consisting mostly of glasses.
RINSE ONLY For rinsing partial loads that will be washed later.
Do not use detergent.
PLATE WARMER For warming clean dishes and serving plates. This
cycle will take approximately 32 minutes.
Start
■ Make sure the Dial is at an
OFF
position.
■ Select the desired Cycle and Options. Indicators will
show selections.
■ Turn the Dial to the desired Cycle. Don’t turn it past
the Selected Cycle position, or you could accidentally
miss a rinse.
■ Latch the door. Cycle On lights up. There is a time
delay between start-up and water fill so you will not
hear any wash action right away.
9
1
2
3