GE GFC300F Garbage Disposal User Manual


 
ADDITIONAL MATERIALS YOU MAY NEED
Steel punch or wooden dowel
Petroleum jelly or liquid soap
Hose clamp
Dishwasher drain connector
Adjustable pipe wrench
Plumber’s putty (for cast sinks)
Stepped rubber drain adapter
Wire nuts
Cable connector
Flexible drain pipe
Power cord kit (Part Number PM3X215GDS)
4
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
Save these
instructions for local inspector’s use.
IMPORTANT
Observe all
governing codes and ordinances.
Note to Installer
Be sure to leave these
instructions with the Consumer.
Note to Consumer
Keep these instructions
for future reference.
Skill level – Installation of this appliance requires
basic mechanical skills.
Completion time – 1 hour
Proper installation is the responsibility of the
installer.
Product failure due to improper installation is not
covered under the Warranty.
If you have questions, call 1-800-GECARES
or visit our Website at:
www.GEAppliances.com
Installation
Disposer
Instructions
WHAT YOU WILL NEED
Phillips and flat blade screwdrivers
Channel lock pliers, slip joint Hammer
Nut driver
PREPARATION
1. Disconnect electrical power supply to disposer.
2. Remove old disposer or sink flange assembly.
3. Inspect drain line. If it is heavily coated with hardened
grease and accumulations, rout out with a plumber’s
snake.
4. Remove old sealing materials and gasketing from sink
opening, both top and bottom.
NOTE: Top and bottom of sink surfaces must be free of
any materials to prevent leaks.