GE GPS5WW Appliance Trim Kit User Manual


  Open as PDF
of 4
 
installation instructions
STEP 9 ATTACH SIDE PANEL TO SUPPORT
BRACKET AND TOGGLE BOLTS
Place the side panel against the panel support bracket and
insert two 1/4" machine screws through the side panel and
support bracket while aligning the side panel with the toggle
bolts. Install the lock washers and 1/4" nuts on the machine
screws but do not tighten.
Install the remaining two 1/4" machine screws through the side
panel and toekick panel. Install the lock washers and 1/4" nuts
on the machine screws, but do not tighten.
STEP iO TIGHTEN THE FASTENERS
Tighten the fasteners in this order:
1.Toggle bolts or wood screws on back of panel (if present)
2. Machine screws on top of panel
3. Machine screws on bottom of panel.
Tighten
Figure H
imc]ginc]tion (It work
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
GE Consumer & Industrial
General Electric Compang
Louisville, Kentuckg 40225
ge.com
Pub. No. 31-30204
Dwg. No. 206C1559P144
ND 05J-1434 (9/05)
 previous