Filter
Top Products
... saveYour Time allclMoney
BeforeVou Canforservice,
“
Check the I%wbkm-ilsolver
If you ha~c a problem, it may be
minor. You may be able to correct
it jrourself. .Just use this Problem
Solver to locate your problem
and then follow the suggested
recommendations.
The Problem Sober
PROBLEM
DISHWASHER WON’T
RUN
UNUSUAL NOISE
DISHES DON’T DRY
UNCLEAN DISHES
.4ND FLATWARE
BLACK OR GRAY
MARKS ON DISHES
POSSIBLE CAUSE AND REMEDY
A fuse in your home may be blown, or the circuit breaker tripped.
Replace fuse or reset circuit breaker. Remove any other appliances from
the circuit.
Utensils may not be secure on rack pins, Or something small may have
dropped from the rack. Water is causing utensils to rattle. Make sure
everything is securely placed in dishwasher.
Make sure inlet water temperature is correct. (See page 6.)
Unload the bottom rack first. Water from dishes in the top rack maybe
spilling into the bottom rack.
Check for improper loading. Dishes shouldn’t nest together. Avoid
overloading.
Check inlet water temperature. It should beat least 120‘F. (To test,
see page 6.)
To obtain the benefits of a complete cycle, be careful that you do not
turn the dia! my further than necessary to start the dishwasher,
Water pressure may be temporarily low. Turn on a faucet. Is water coming
out slower than usual? If so, wait until pressure is normal before using
your dishwasher.
Plugged air gap. (See page 11.)
Improper rack loading. (See pages 8 &9.)
Aluminum deposits often leave marks when they rub against other things.
Remove marks with a mild abrasive cleanser.