Consumer Support
Troubleshooting TipsOperating InstructionsSafety Instructions
15
GEAppliances.com
Problem Possible Causes What To Do
Dishwasher Water supply not • Turn water supply on.
will not fill turned on
Water supply line • Check water supply line.
may be clogged You may need a plumber.
Aluminum Certain water conditions • Scour all surfaces with a
discoloration in combination with soap-filled pad.
some detergents tend
• Try another dishwasher
to darken aluminum
detergent. Cascade
®
, Cascade
®
Complete and Electrasol
®
Automatic Dishwashing
Detergents have been
approved for use in all
GE dishwashers.
Dishes don’t dry Low inlet water • Make sure inlet water
temperature temperature is correct.
Rinse agent dispenser • Check the rinse agent
is empty dispenser.
Improper rack loading • Load items to permit proper
drainage.
HEATED DRY OFF • Select HEATED DRY ON.
is selected
Dishes and flatware Inlet water temperature • Raise the water heater
not clean is below 120°F temperature to 120°F.
Water pressure is • Turn on a faucet. Is water
temporarily low coming out more slowly than
usual? If so, wait until pressure
is normal before using your
dishwasher.
Air gap is clogged • Clean the air gap.
Improper rack loading • Make sure large dishware
does not block the detergent
dispenser or the wash arm.
Detergent • Use the correct amount of
dishwasher detergent that
is fresh and dry. Cascade
®
,
Cascade
®
Complete and
Electrasol
®
Automatic
Dishwashing Detergents
have been approved for
use in all GE dishwashers.