GE JBP76 Range User Manual


 
25
Troubleshooting TipsInstallation Instructions Customer ServiceOperating InstructionsSafety Information
How to Delay the Start of Cleaning
(on some models)
Latch the door.
Turn the Oven Temperature knob to
AUTO SELF CLEAN.
Press the
START TIME ON/OFF
pad.
Press the
HOUR
and
MIN.
pads to set the time
cleaning will start.
When the
LATCH DOOR
light flashes, slide the
latch handle to the left as far as it will go and turn
the Oven Temperature knob to
OFF
.
4
3
2
1
OFF
PREHEATED
OVEN ON
BROIL
LATCH
DOOR
450
AUTO
SELF
CLEAN
WM
200
250
300
350
400
500
550
START
TIME
ON/OFF
You may notice some white ash in the oven. Wipe it up with a damp
cloth after the oven cools.
If white spots remain, remove them with a soap-filled steel wool pad and rinse
thoroughly with a vinegar and water mixture.
These deposits are usually a salt residue that cannot be removed by
the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
You cannot set the oven for cooking until the oven is cool
enough for the door to be unlatched.
While the oven is self-cleaning, you can press the
CLOCK
pad to
display the time of day. To return to the clean countdown, press
the
COOK TIME ON/OFF
pad.
If the shelves become hard to slide, wipe the shelf supports
with cooking oil.
After a Clean Cycle