Filter
Top Products
10
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
Oven Control, Clock and Timer Features and Settings
BAKE Pad
Touch this pad to select the bake function.
BAKE Light
Flashes while in edit mode—you can change
the oven temperature at this point. Glows
when the oven is in bake mode.
START/ON Pad
Must be touched to start any cooking or
cleaning function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
The display will show
PrE
while preheating.
When the oven reaches the selected
temperature, the oven control will beep and
the display will show the oven temperature.
If “F– and a number or letter” flash in the display and the
oven control signals, this indicates a function error code.
If your oven was set for a timed oven operation and
a power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there has been
a power outage. Reset the clock.
If the function error code appears during the self-cleaning
cycle, check the oven door latch. The latch handle may have
been moved, even if only slightly, from the latched position.
Make sure the latch is moved to the right as far as it will go.
Touch the OFF pad. Allow the oven to cool for one hour.
Put the oven back into operation. If the function error code
repeats, disconnect the power to the range and call
for service.
TIMER Pad
Touch this pad to select the timer feature.
Then touch the
+
and
–
pads to adjust the
timer.
TIMER Light
Flashes while in edit mode—you can change
the set time at this point. Glows when the
timer has been activated. Flashes again when
the time has run out until the control is reset.
CLOCK Pad
To set the clock, press this pad twice and
then press the
+
and
–
pads. The time of day
will flash in the display when the oven is first
turned on.
START TIME Pad (on some models)
Use along with the
COOK TIME
or
CLEAN
pads to set the oven to start and stop
automatically at a time you set.
START TIME Light
Flashes while in edit mode—you can change
the start time at this point. Glows when the
function has been activated.
COOK TIME Pad (on some models)
Touch this pad and then touch the
+
or
–
pads to set the amount of time you want
your food to cook. The oven will shut off
when the cooking time has run out.
COOK TIME Light
Flashes while in edit mode—you can change
the set time at this point. Glows when the
function has been activated. Flashes again
when the time has run out until the control
is reset.
Throughout this manual, features and appearance may vary from your model.
Using the oven controls. (on some models)