Filter
Top Products
12
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
By using the Convection Conversion feature you
can automatically convert the oven temperature
from regular baking to Convection Bake
temperatures.
To convert the oven temperature for
convection baking, follow the steps below.
Touch and hold the
CONVECTION
BAKE/ROAST
pad for approximately
5 seconds.
Using the number pads, enter
the temperature recommended
in the recipe.
Touch the
START
pad.
The display shows the converted
(reduced) temperature. For
example, if you entered a recipe
temperature of 350°F., the display
will show
325°F.
when it is converted.
Touch the
CLEAR/OFF
pad when
baking is finished.
NOTE: Conversion must be set each time
you want to use it. It is not held in memory.
Conversion is used on Convection Bake
only.
Cook and Hold
Your control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
the cooking function is finished.
To activate this feature, follow the steps
below.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
COOKING TIME
pad. The
display will show
Hld OFF.
Touch the
COOKING TIME
pad again
to activate the feature. The display
will show
Hld ON.
Touch the
START
pad to activate
the cook and hold feature and
leave the control set in this special
features mode.
+
Using Convection Conversion
Special features of your oven control.
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour
military time clock or black-out the clock
display, follow the steps below.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
CLOCK
pad once. The
display will show
12 hr.
If this is
the choice you want, touch the
START
pad.
Touch the
CLOCK
pad again to change to
the 24 hour military time clock. The
display will show
24 hr.
If this is the choice
you want, touch the
START
pad.
Touch the
CLOCK
pad again to black-out
the clock display. The display will show
OFF.
If this is the choice you want, touch
the
START
pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
+
How to Set the Oven for Convection Baking or Roasting
Touch the
CONVECTION BAKE/ROAST
pad once for Convection Bake or
twice for Convection Roast. Display
will light
CONV BAKE
or
CONV ROAST
to indicate setting.
Touch the number pads to set the
desired oven temperature.
Touch the
START
pad.
To change the oven temperature, touch
the
CONVECTION BAKE/ROAST
pad to
indicate Bake or Roast function and then
the number pads to set the new
temperature.
When the oven starts to heat, the
changing temperature, starting at 100°F.,
will be displayed. When the oven reaches
the temperature you set, 3 beeps will
sound.
Touch the
CLEAR/OFF
pad when
finished.
NOTE: You will hear a fan while cooking with
convection. The fan will stop when the door is
opened but the heat will not turn off.