Filter
Top Products
25
Before you call for service…
ge.com
Troubleshooting Tips
Save time and money! Review the chart on this page
first and you may not need to call for service.
Problem Possible Causes What To Do
Burners do not light Plug on range is not • On models with electric ignition, make sure electrical
completely inserted in plug is plugged into a live, properly grounded outlet.
the electrical outlet.
Burner holes on the side • Remove the burners and clean them with a safety pin
or around the top of the or paper clip. Make sure you do not enlarge the holes.
burner may be clogged.
Burners may not be fitted • Remove the burners and reinstall them properly.
correctly onto the mounting
brackets.
Burners have yellow or The combustion quality of • Use the illustrations below to determine if your burner
yellow-tipped flames burner flames needs to be flames are normal. If burner flames look like A, call for
determined visually. service. Normal burner flames should look like B or C,
depending on the type of gas you use. With LP gas, some
yellow tipping on outer cones is normal.
A–Yellow flames B–Yellow tips C–Soft blue flames
Call for service on outer cones Normal for
Normal for LP gas natural gas
Safety Instructions
Operating Instructions Care and Cleaning
Troubleshooting Tips Consumer Support