GE JKP56 Oven User Manual


 
23
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support
www.GEAppliances.com
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
Press the
SELF CLEAN
pad.
Using the number pads, enter the
desired clean time.
Press the
DELAY START
pad.
Using the number pads, enter the
time of day you want the clean cycle
to start.
Press the
START
pad.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the
LOCKED DOOR
light goes off.
When the
LOCKED DOOR
light is off, open
the door.
NOTE: On double oven models, you can set a
delay clean in both ovens at the same time.
The second oven set will automatically delay
the start of cleaning until the end of the first
oven’s clean cycle.
To recall the start time of the second oven set,
press the DELAY START pad on the controls for
the second oven.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with a soap-
filled steel wool pad and rinse thoroughly with a
vinegar and water mixture.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
You cannot set the oven for cooking
until the oven is cool enough for the
door to unlock.
While the oven is self-cleaning, you
can press the
CLOCK
pad to display
the time of day. To return to the
clean countdown, press the
SELF
CLEAN
pad.
If the shelves become hard to slide, wipe
the shelf supports with cooking oil.
Care and cleaning of the oven.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.
How to Remove Packaging Tape
To assure no damage is done to the finish
of the product, the safest way to remove
the adhesive left from packaging tape
on new appliances is an application
of a household liquid dishwashing
detergent, mineral oil or cooking oil.
Apply with a soft cloth and allow to soak.
Wipe dry and then apply an appliance
polish to thoroughly clean and protect
the surface.
NOTE: The plastic tape must be removed from all
chrome trim. It cannot be removed if it is baked on.