GE JMP32AR Range User Manual


 
Oven Lamp Replacement
CAUTION: Before replacing your oven lamp bulb,
disconnect the electric power for your range at the
main fuse or circuit breaker panel or pull the plug.
Be sure to let the lamp cover and bulb cool
completely before removing or replacing them. When
in use, light bulbs can become warm enough to break
if touched with a moist cloth or towel. When cleaning,
avoid touching warm lamps with cleaning cloths if the
lamp cover is removed.
The oven lamp (bulb) is covered with a glass
removable cover which is held in place with a wire.
Remove the oven door, if desired, to reach the
cover easily.
‘/
QQ
Y,
\
-
@
“\<,,)
e
G
\
-%
)
:
I
To remove:
Hold your hand under the cover so it doesn’t fall
when released. With fingers of the same hand, firmly
push back the wire until it clears the cover. Lift off
the cover.
DO NOT REMOVE ANY SCREWS.
Replace bulb with 40-watt home appliance bulb.
To replace cover:
Place it into the groove of the lamp receptacle. Pull
the wire forward to the center of cover until it snaps
in place. When in place, the wire holds the cover
fdy.
Be certain the wire is in the depression in the
center of the cover.
Connect electric power to the range.
Porcelain Enamel Cooktop
The porcelain enamel finish is sturdy but breakable if misused. This finish is
acid-resistant. However, any acid foods spilled (such as fruit juices, tomato or
vinegar) should not be permitted to remain on the finish.
If acids spill on the cooktop while it is hot, use a dry paper towel or cloth to
wipe it up right away. When the surface has cooled, wash with soap and water
or cleansing powders. Rinse well.
For other spills such as fat smatterings, wash with soap and water or cleansing
powders after the surface has cooled. Rinse well. Polish with a dry cloth.
27