GE JN334 Ventilation Hood User Manual


 
Use and Care of Recirculation Hood Models JN322, JN334, JN335,
JMW,
&
JN635 and Ventilating Hood Models JV322, JV324, JV332,
JV334, JV335, JV624, JV634, & JV635
IMPORTANT SAFETY
C. When cutting or drilling into wall or ceiling,
INSTRUCTIONS
do
not damage electrical wiring and other
hidden utilities.
WARNING-
TO
REDUCE THE RISK
D.
Ducted
fans must always be vented to
OF FIRE, ELECTRIC SHOCK, OR
the outdoors.
INJURY TO PERSONS, OBSERVE
E.
If this unit is to be installed over a tub or
THE FOLLOWING:
shower, it must be marked as appropriate
for the application.
A.
Use this unit only in the manner intended
by the manufacturer. If you have any questions,
WARNING
To
reduce the risk
of
fire,
contact the manufacturer.
use
ody
metal
ductwork.
B.
Before servicing or cleaning
uni~
switch
power off at service panel and lock service
When using your hood...
panel to prevent power
t%om
being switched
on accidentally.
Never leave surface units unattended
at
high
For general ventilating use only.
Do
not use
settings.
Boilover
causes smoking and greasy
to exhaust hazardous or explosive materials
spillovers
that may ignite and spread if hood is
and vapors.
used. Use surface unit heat settings recommended
by
the
manufacturer and adequate-size utensils.
When you get
your
new hood...
*
Never use your cooking appliance for warming,
or heating the room. The electrical wiring of
your
c
Have it installed and properly grounded by a
range hood may not withstand the
resulting
qualified technician in accordance with the
excessive
heat.
installation instructions.
Keep the hood clean and clean grease filter or
Have the installer show you the location of
the hood circuit breaker or fuse and mark it for
replace combination filter as recommended to
maintain good venting and to avoid grease fires.
easy reference.
Take
the time to read our suggestions for best use.
WARNINGTO REDUCE THE RISK
OF
A RANGE
TOP
GREASE
FIRE:
WARNIN&
TO
REDUCE
??H’E
RISK
OF FIRE, ELECTRIC SHOCK,
OR
A.
Keep
fa,
filters and grease laden
INJURY TO PERSONS, OBSERVE
surfaces clean.
THE FOLLOWING:
B.
Always
tumhood
ON when cooking
at high heat.
A.
Installation work and electrical wiring must be
done by qualified person(s) in accordance with
C. Use high range settings on range only
all
applicable codes and standards, including
when necessary.
Heat
oil slowly
on
low
fwe-rated
construction.
to medium setting.
B. The
combustion airflow needed for safe
D.
Don’t leave range unattended when cooking.
operation of fuel-burning equipment maybe
E.
Always use cookware and utensils appropriate
affected by this unit’s operation. Follow the
for the type and amount of food being prepared.
heating equipment manufacturer’s guideline and
(continued
nextpage)
safety standards such as those published by the
national Fire Protection Association
(NFPA),
and
the
American Society for Heating
Refrigeration and Air Conditioning Engineers
(ASHRAE), and the local code authorities.
Turn the page for Operation and Maintenance instructions.
GE Quality Product
——