Filter
Top Products
36
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
Using the self-cleaning oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
Select
FEATURES
.
Select
SELF CLEAN
.
Select the desired self clean.
A 3-hour self-clean time is
recommended when cleaning small,
contained spills. A self-clean time of
4 hours or longer is recommended
for a dirtier oven.
LO
(3 hrs) will self clean the oven
for 3 hours.
STD
(4 hrs) will self clean the oven
for 4 hours.
ADJUST TIME
allows oven to be set
for any time between 3 and 5 hours.
Input the clean time (to nearest 5
minutes) using the number pads
and select
ENTER
.
Select
DELAY CLEAN
.
Using the number pads, enter the
time of day you want the clean cycle
to start.
Select
ENTER
.
Select
START
.
The door locks automatically when you
select
START
. The oven will remain
locked. The display will show the start
time. Once the self-clean cycle starts, it
will not be possible to open the oven
door until the temperature drops below
the lock temperature and the goes off.
When goes off, you will be able to
open the door.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with a
soap-filled steel-wool pad and rinse thoroughly
with a vinegar and water mixture.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
■ You cannot set the oven for cooking
until the oven is cool enough for the
door to unlock.
■ If the racks become hard to slide, wipe
the rack supports with cooking oil.