GE JTP10GS Oven User Manual


 
Proper care and cleaning are important so your
oven
will give you efficient
and satisfactory service. Follow these directions
carkfully
in caring for your
oven to assure safe and proper maintenance.
Oven Shelves
Clean the oven shelves with a mild abrasive
cleanse~.
After cleaning, rinse the shelves with clean water
~d
dry with a clean cloth.
To
remove heavy, burned-on soil, soapy metal pads.
may be used. After scrubbing, wash with soapy
wat~r,
rinse and dry.
The oven shelves may be cleaned in the self-cleanin$
oven. However, they will darken, lose their luster
and
become hard to slide. Wipe the shelf supports with ~
cooking oil after self-cleaning to make shelves
slide
more easily.
Broiler Pan and Rack
After broiling, remove the broiler pan and rack
froh
the oven. Remove the rack from the pan. Carefully ~
pour out the grease in the pan into a proper
containe~.
Wash and rinse the pan and rack in hot, soapy water.
a
If food has burned on, sprinkle the rack while hot ~
Do not store a soiled broiler pan and rack in the oven.
with detergent and cover with wet paper towels or a
~
dish cloth. Burned-on foods will soak loose while the
Do not clean in the self-cleaning oven.
meal is being served. Wash, scour if necessary with
~
The broiler pan and rack may also be cleaned in
soap-filled or plastic scouring pad. Rinse well and
diy.
the dishwasher.
Oven Light
Before replacing the light bulb,
Replace
wi~h
a 40 watt appliance
disconnect the power to the oven.
bulb.
Replace the bulb cover and
To replace the oven light:
reconnect
the
power to the oven.
Be sure the bulb is cool. Do not
NOTE:
Yo~
will need to reset the
touch a hot bulb with a damp cloth,
clock.
as the bulb may break. Use a dry
potholder, to prevent possible harm
to hands, and very carefully
unscrew the bulb cover and bulb.
Control Panel
It is a good idea to wipe the control panel after each ~
Do not use abrasive cleansers, strong liquid cleaners,
use of the oven. Clean with mild soap and water or
~
plastic scouring pads or oven cleansers on the control
vinegar and water, rinse with clean water and polish
~
panel—they will damage the finish. A 50/50 solution
dry with a soft cloth.
of vinegar and hot water works well.
20