Filter
Top Products
Customer Service
Operating InstructionsSafety Instructions
Installation Instructions Troubleshooting Tips
Connect Power
Plug power cord into a properly grounded receptacle.
Optional Kits
JXRB57
optional accessory for indoor remote
location of the blower/motor assembly. Use this
kit when the blower and motor assembly will be
located outside or below the cabinet floor.
JXBC57
optional outdoor cover accessory for
remote installation of blower and motor assembly
on an outside wall.
Installing the Cooktop
Align the cooktop with the downdraft and fasten
cooktop in place.
NOTES:
■ Accurate alignment of cooktop and downdraft
is necessary to ensure that there is no
interference when air vent is raised and
lowered. There should be a gap of 1/16″–1/8″
between the back of the cooktop and the front
of the downdraft cover.
■ Radiant cooktops cannot be flush mounted
when using this downdraft vent.
17