Filter
Top Products
Automatic
Roasti~
Auto Roast uses the temperature
probe to cook to the desired
serving tem~rature. Unlike
Temp
Cook/Hold, which uses a
single power level, Auto Roast
-
up to 3 power settings which
automatically switch during
roasting, thus providing even,
tender cooking
resulk
without
overcooking.
Just as in conventional roasting,
only tender roasts should be Auto
Roasted until specified internal
temperatures are reached. Less
tender roasts should be microwaved
by time, according to
the cookbook
which comes with your oven.
Place tender beef roast in cooking
bag on trivet in microwave-safe
dish. (Refer to manufacturer’s
instructions for proper use of
cooking bag. ) Insert probe through
cooking bag horizontally into the
center meaty area not touching
bone or fat. Make sure the handle
does not touch the food or top or
sides of the oven.
P
a
2.
At
90°F.,
display switches to
show meat’s internal temperature.
‘lace
pork roast in cooking bag
nd
place in microwave-safe dish.
=
3.
mice
during cooking program
oven will signal and
“TURn”
will
flash if codes 1 through 5 have been
selected. Open the door and turn
the meat over. The probe may be
disconnected from the receptacle
I
/
,
for easier turning of the
me~t
Place meat in oven with probe to
the right. Insert cable end of probe
firmly into receptacle on oven wall.
How to Auto Roast
Beef to
Mefim
1.
Touch
AU~
ROAST pad.
“AU~”
appears on display and
“ENTER CODE” flashes. Touch
number pad 2. “CODE 2“ appears
on display and “START” flashes.
Touch START. Display shows
temperature and “CODE
2:’
without
interrup~ing
the program.
(Remember tore-insert the probe.)
4. Close door and touch START.
The temperature will return on
display. Oven monitors internal
food temperature; automatically
switching to lower power as meat’s
temperature rises. This helps
prevent toughening or overcooking.
5. After
fmd
temperature is reached,
oven switches to Hold
temp
for up
to 1 hour, then shuts off.
24