Filter
Top Products
Attach the exhaust adapter to the oven rear panel
by sliding it into the guides at the top center
of the back of the oven.
OUTSIDE BACK EXHAUST (Horizontal Duct)
PREPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
B1.
INSTALLATION OVERVIEW
B1. Prepare Rear Wall
B2. Attach Exhaust Adapter
to Wall Plate
B3. Attach Mounting Plate
to Wall
B4. Prepare Top Cabinet
B5. Adjust Blower
B6. Mount the Oven
Installation Instructions
B
Read the instructions on the REAR WALL TEMPLATE.
Tape it to the rear wall, lining up with the holes
previously drilled for holes A and B in the wall plate.
Cut the opening, following the instructions of the REAR
WALL TEMPLATE.
15
3
2
1
Unscrew and remove the exhaust adapter assembly
from the top of the oven.
1
2
Exhaust Adapter
Damper
(hinge side up)
Locking
Tabs
Guide
ATTACH THE EXHAUST ADAPTER
TO THE OVEN REAR PANEL
B2.
Guide
Push in securely until it is in the lower locking tabs.
Take care to assure the damper hinge is installed so
that it is at the top and that the damper swings freely.
You need to cut an opening in the rear wall for outside
exhaust.
Exhaust
Adapter