Filter
Top Products
HOW TO USE THE
mTE/SECOm
T~R
u
The Minute/Second Timer
The Minute/Second Timer has three timing
functions:
●
It operates as a minute timer.
●
It can be set to delay cooking.
●
It can be used as a hold setting after defrosting.
The Minute/Second Timer operates without
microwave energy.
Using a Holding Time
The Minute/Second Timer can also be used to
program a “holding time” between microwave
cooking functions. The time can range from one
second to 99 minutes
and
99 seconds. A holding
or standing time may be found in some of your
own recipes or in a cookbook.
How to Time a 3-Minute Phone Call
Step 1:
Touch MIN/SEC TIMER pad.
Step
2: Touch number pads 3, 0 and O (for 3 minutes
and no seconds).
Step
3: Touch START. Display shows time counting
down.
The
timer signals when time is up.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds,
touch
~ME
COOK 1 & 2 and enter cook time. Touch
MIN/SEC TIMER and enter number of minutes to
delay cooking. Touch START. Timer will count down
to zero and cooking will begin.
How to Defrost, Hold and Time Cook
Let’s say you want to defrost a frozen casserole for
15 minutes, hold for 10 minutes and then Time Cook
for 25 minutes. Here’s how to do it:
Step 1:
Take
casserole from freezer and place in oven.
m
Step 2:
Touch TIME DEFROST.
Step 3:
Touch pads 1, 5, 0 and O for 15 minutes
defrosting time. (Defrosting is automatically set on
m
Step
4: Set standing or hold time
by touching MIN/SEC TIMER.
Step 5:
Touch 1,0,0 and O to hold for ten minutes.
Step 6:
Touch TIME
m
cooK1
&2”
Step
7: Touch 2,5,0 and O for 25 minutes of
power
le~el
3 but can be
c~anged
by
touching
the
coo-ting
time.
POWER LEVEL pad and the desired power level.)
m
Step 8:
Touch START. As
each function is automatically
performed, oven display shows
instructions entered and the
function. When time is up, the
oven signals and flashes “End.”
9
—