5
6
3
4
2
1
INSTALLING THE
CHARCOAL FILTER
C6.
MOUNT THE MICROWAVE
OVEN
(continued)
C5.
Install the charcoal filter. When properly installed,
the wire mesh of the filter should be visible from
the front.
Replace the grille and the 2 screws.
Close the door.
22
Charcoal
Filter
1400 Series Model
1600 and 1800 Series Model
Insert mesh-side down
Insert mesh-side up
On 1400 and 1600 Series models, remove 2 screws
on front of grille using a #1 Phillips screwdriver.
On 1800 Series models, remove 2 screws on top
front of grille using a #2 Phillips screwdriver.
Open the door.
Remove the grille.
Installation Instructions
8
7
6
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
Tighten center
screw completely.
Install grease filters. See the Owner’s Manual
packed with the microwave.
5
1400 and 1600 Series
1800 Series