10
Before You Begin
IMPORTANT: Save these instructions for the
local electrical inspector’s use.
IMPORTANT: OBSERVE ALL GOVERNING CODES
AND ORDINANCES.
NOTE TO INSTALLER: Leave these instructions
with the appliance after installation is completed.
NOTE TO CONSUMER: Keep this Owner’s
Manual and Installation Instructions for
future use.
NOTE: This appliance must be properly
grounded.
NOTE: Insure that the power cord does not
contact the hot surfaces on the bottom of
ovens, cooktops, or any other appliance.
Tools Needed
■ 2 x4 or 2 x 2 lumber for runners and brace
■ Wood screws and adhesive or other hardware
for installing runners or shelf to support
warmer drawer.
Runners must be level, rigidly mounted and capable of
supporting 150 pounds.
■ Saw
■ Level
■ Drill and 1/16″ bit
■ Phillips screwdriver
Custom Panel Kits
ZXD27B—This kit provides for the installation
of a custom front panel on 27″ wide models.
ZXD30B—This kit provides for the installation
of a custom front panel on 30″ wide models.
Product Dimensions
27″
23
1
⁄4″
9″
1″
A
10
1
⁄2″
26
1
⁄4″
Including handle
Dimension A
27″ Drawer 30″ Drawer
26
3
⁄4″ 30″
Consumer Support Troubleshooting Tips Installation Instructions Care and Cleaning Operating Instructions Safety Instructions
Installation of the warming drawer.
Read these instructions completely and carefully.