Filter
Top Products
www.geadvantium.com
Speedcooking
Advantium is already pre-set to cook over
100 popular dishes.
1. Press the speedcook button.
If no selection is made within
15 seconds, the display will revert
back to the time of day.
2. Turn the selector dial to FOOD
MENU. Press the dial to enter.
3. Turn the selector dial to select the
type of food category you want.
Press the dial to enter.
4. Turn the selector dial to select the
specific food (menu selection).
Press the dial to enter.
5. Turn the selector dial to select
amount, size and/or doneness
(if required, the oven will prompt
you.) Press the dial after each
selection.
6. Once the display shows:
START? either press start or the
selector dial to start cooking.
For certain foods, turn the food over when
the oven signals TURN FOOD OVER.
Press START to resume cooking.
For certain foods, the oven will signal
CHECK for DONENESS,. Check to see if
the food is done to your liking. The oven
will continue to cook for several minutes.
Take the food out when it is done to your
liking.
To review settings during cooking,
press the selector dial.
If you enter an undesired selection at any
time, simply press the BACK button to
return to the previous step, or press the
CLEAR/OFF button and re-enter the
desired selections.
Using
speedcook
features
CAUTION: When using speedcook programs, remember that the oven, door and
dishes will be very hot!
Prior to the first use of your oven, the clock must be set. See the Advantium Quick
Start section.
Before you begin, make sure the oven rack (turntable) is in place.
Use the black metal tray (baking sheet), at all times when speedcooking.
The oven rack (turntable) must always
be in place when using the oven.
Put food or non-metal, oven-safe
cookware directly on the black metal
tray to speedcook.
To use a
pre-set
speedcook
menu
■ Early in a speedcook program, you will
see OPTIMIZING COOK TIME in the
display. The oven automatically senses
the electrical voltage level in your home
and adjusts the cooking time up or
down for proper cooking.
■ If the door is opened during cooking,
the oven will stop and PAUSE will
appear in the display. Close the door
and press the START/PAUSE button
to resume cooking.
■ At anytime during cooking you can
turn the selector dial to change the
cooking time. You can change power
levels by pressing POWER LEVEL.
■ To assure consistent cooking results,
the oven may reduce power levels if the
oven is hot at the beginning of a
program.
■ At the end of cooking, the automatic
fan may continue to run for a short
time to cool internal components.
■ To cook for additional time after a
cooking cycle has been completed,
use the resume feature.
14