Filter
Top Products
[11
l
/
2. Put the drawerslidesback on
the frame. ‘I’heslopedendsmust
beat the front.
3. Reachin, pushthe frontofthe
glasscoverup and, at the same
time, pull it forwarduntil itclears
the frameat the back.
4. Tilt and removethe glasscover.
3. Slidethe center and rightdrawer
slidestowardthe middleand slide
the l/3-widthdrawer all the way
intothem.
5. Removethe 3 drawer slides.
6. Removethe drawer frame as
foJlows:
~ Lift the front of the frame to free
it from the supportsat each side.
~ Lift the rear of the frame to free
its hooks from the tracks on the
back wall of the refrigerator.
QTiltthe frame and take it out.
‘h replace:
1. Fit the hookson the drawer
frame into the second-from-the-
bottornslots on the tracks at the
rear of the refrigerator and lower
the front of the frame until it locks
into position and rests on the front
supports at each side.
/’-’%
—.
1
~
..-.-”
4. Slide the l/3-width drawerall the
wayto the right.
5. Mountthe 2/3-width drawer
ontothe center and left slides.
, ~. Replacethe glass cover,pushing
ltsrear edge firmly intothe rear
frame channel and gentlylowering
the front intoplace.
Toremovethe drawers,liftfrontup -------,------
slightlyand puHthedrawerstraight
out.
[
Toremovethe cover,supportit
with onehand, tilt itand take itout. .
.. .-
J
S
A
1
~.
-
If the cover suPPortat front center,
(on models so”~quipped)becomes
separated from thedrawer cover,
reinstallthe supportbeforereturning
the coverto the cabinet.
,-
To ‘ffeinst.d - Wwer support,
turn the cover and support upside
down and guide the pins on the
support into the hooks on the cover
as shown. Then push firmly until
the pins lock into place.
pqy)
9
-.
...