GE ZET3058 Oven User Manual


 
Clock, Timer and Control Lockout
Trivection
Wall Oven
To set
the timer
The timer is an hour and minute timer only. The
timer does not control oven operations. The maximum
setting on the timer is 9 hours and 59 minutes. To set
10 minutes, enter 10. DO NOT ENTER 10:00!
1 Press the TIMER ON/OFF pad.
2 Press the number pads until the amount
of time you want shows in the display. For
example, to set 2 hours and 45 minutes,
press 2, 4 and 5 in that order. If you make
a mistake, press the TIMER ON/OFF pad
and begin again.
To set
the clock
The clock must be set to the correct time of day
for the automatic oven timing functions to work
properly. The time of day cannot be changed
during timed baking, a self-cleaning cycle or
delayed start time.
1 Select SETTINGS.
2 Select CLOCK.
3 Press the number pads.
4 Select ENTER.
Control
lockout
Your control will allow you to lock out the touch pads
so they cannot be activated when pressed.
NOTE: On double oven models, this activates this
feature for both ovens.
To lock/unlock the controls:
1 Press the 7 and 8 pads at the same time for
3 seconds, until the control screen shows
CONTROL IS LOCKED.
2 To unlock the control, press the 7 and 8 pads
at the same time for 3 seconds, until
CONTROL IS LOCKED disappears from
the control screen and the main menu
is displayed.
When this feature is on and the touch pads
are pressed, the control will show CONTROL
IS LOCKED.
• The control lockout mode affects all touch pads.
• The control will remain locked after a power failure.
To reset
the timer
If the remaining time is not in the display (clock,
delay start or cooking time are in the display),
recall the remaining time by pressing the TIMER
ON/OFF pad or using REVIEW TIMES.
You may change it by pressing the TIMER
ON/OFF pad, then press the number pads until
the time you want appears in the display.
To cancel
the timer
Press the TIMER ON/OFF pad twice.
3 Select START.
After selecting START, SET disappears; this tells you
the time is counting down, although the display does
not change until one minute has passed. Seconds will
not be shown in the display until the last minute is
counting down.
4 When the timer reaches :00, the control will
beep 3 times followed by one beep every 6
seconds until the TIMER ON/OFF pad is
pressed once.
12