Filter
Top Products
Tools and
Materials
Required
Measure carefully when cutting countertop.
Make sure sides of opening are parallel and
rear and front cuts are exactly perpendicular
to sides.
•The Monogram gas updraft cooktop is
designed to fit in a 36" or larger base cabinet.
•The countertop cutout for cooktop must be:
–34-1/2" wide
–18-1/8" deep
–Allow at least 4-5/8" clearance between
back of cutout and wall.
–Allow at least 8-13/16" clearance from right
and left side of cutout to adjacent wall.
–Allow at least 2-1/4" clearance between
front of cutout and front edge of
countertop.
Installation Preparation
Gas Updraft Cooktop
4
Caution:
Wallcoverings,
countertops and cabinets should
withstand 200°F heat generated
by the cooktop.
•Cooktop requires 3" free space below
countertop.
•If installing cooktop above a cabinet with
drawers, it may be necessary to use a shorter
length drawer to allow clearance for gas
connection.
•In some cases, two 3/8" I.D. 45° elbows and
a pipe nipple may be added between regula-
tor and cooktop to move regulator further
back in order to avoid interference with
drawer.
•Carpenter’s square
•Pipe wrench
•Manual gas line
shut-off valve
•3/4" NPT x 3/4"
I.D. or 1/2" NPT x
1/2" I.D. flare
union adaptor for
connection to
supply line
•1/2" NPT x 3/4"
I.D. or 1/2" I.D.
flare union adaptor
for connection to
regulator
•Gas-resistant pipe
joint sealant
•Self-adhesive gasket
(supplied)
•Two clamping
brackets and
screws (supplied)
•Gas pressure
regulator (supplied)
•Large flat-blade
screwdriver
•Saw
•5 foot AGA-certified
flexible metal
appliance connec-
tor, 3/4" or 1/2"
I.D. to match gas
supply line:
–If required by local
codes, use solid
pipe with fittings.
Note: Purchase new
flexible line, DO
NOT USE OLD,
PREVIOUSLY USED
FLEXIBLE LINE.
Cut the
Opening
4-5/8" Min.
Cutout to Vertical
Combustible Surface
8-13/16" Min.
to Side Wall
8-13/16"
Min.
Cutout
To Side
Wall
34-1/2"
2-1/4"
Min. From
Front of
Countertop
18-1/8"