Filter
Top Products
Installation Instructions
[STEP 21(continued}
• Turn on the main water supply and flush debris.
Run about a quml ot water through the robing into
a bucket. Shut off water supply at the shut-offvalve.
NOTE: Saddle type shut-off \;flves are included in many
wamr supply kits. Befi)re purchasing, nlake sure a saddle
type \:live complies with vour local plumbing codes.
NOTE: (2ommonwealth of Massaclmsetts Plumbing
Codes 248CMR shall be adhered to. Saddle \:flves are
illegal and use is not pemfitted in Massachusetts.
Consult with your licensed plumbe_:
ISTEP 2AI WATER LINEINSTALLATION
WITH A REVERSEOSMOSIS SYSTEM
Skip thisstep when not usingan RO System
If the water supply to the refl_igerator is fl'om a Reve_e
Osmosis _4hter Svsteln use the refligerator's filter bypass
plug. Using tim reliigerator's water filtration cartridge
with the RO filmr can restflt in hollow ice cubes,
\
FilterBypassPlug
ISTEP31INSTALLSIDEPANELS
Skip this step when not using side panels
If _)tl are using 1/4" side panels, they should be inserted
into the case trim. Fasmn the panels to the refligerator
with stick-on hook and loop fi_stener strips beibre setting
reliigemtor in place.
11
I STEP 41 INSTALLANTI-TIP BRACKETS
WARNING:ANTI-TIP PRECAUTIONS
The refiJgerator is top-heavy and must be secured to prexent
the possibility of tipping fiwward.
ATFENTION:PRECAUTIONS CONTRE LES
BASCULEMENTS
Le r_tiig_ntteur est beattcoup phts lourd en haut et il iitut le
maintenir en place pour &iter la possibilit_ de son basculement
xers l'axant.
• Cttt a 2" x 4" x 35" block md secllle the block to the
motmtii_g, brackets [)roxided using,, #1,9 or #14 wood ....screws
2x4But _
35"Length
Installation Mounting
Height Bracket
FromFloor
ScrewsMountedintoj
VerticalWall Studs
• Secure the bracket xqtb wood block to the back x_allso that it
is 84" (or }our installation height) from the finished flOOl:
[lse #12 or #14 wood scre_s. See illustn_tiolL
Brackets
-- NotRequired
__ Beneatha
Height Soffit
From
Floor
to
Bottom
ofWood
Block
Brackets
Required
Block.
SideView
• Scl'e_:s n/ust penetnae at least one inch into _ertical wall
studs.
• Beibre pushing the reliJgerator into the opening, plug
the po_vr cord into the receptacle. Open the grille panel
and x_ach into the opening at the back to grasp the power
cord. Pull die I)O_r cord into tim opening asyou push the
refligemtor back.
• (;en@ push retiigemtor into the opening with hands ag;dnst
tI'oI/t COFI/eFS.
hnportantNote:Whentherefrigeratorisinstalledunderasoffitorifthereisnot
enoughheightforthismethodofsecurity,bracketscannotbeused.Proceedtostep5
toleveltherefrigeratorandthentostep6tosecurerefrigeratortocabinets.The
refrigeratormustbesecuredtopreventtipping.