Filter
Top Products
19
Anti-Tip Bracket Installation
36” All-Refrigerator and All-Freezer Units
Level unit
All models have 4-point leveling. The front is
supported by leveling legs; the rear is supported
by adjustable wheels. Both are accessible from
the front of the unit.
• To level the back of the unit, turn the 7/16"
hex nut located above the front wheels. Turn
clockwise to raise or counterclockwise to lower
the unit.
• For front leveling, use a 1-1/4" open-end
wrench.
• Adjust height of unit to match installation
cutout opening 83-1/2 to 84-1/2". The unit
should be level and plumb with cabinetry.
CAUTION:
The rear leveling wheels and front leveling legs
are limited to a maximum height adjustment of
1". If the installation requires more than 84-1/2"
height, the installer should elevate the unit on
a sheet of plywood or runners. Cabinetry trim
could also be added across the top of the
opening to shorten the opening. If you attempt
to raise the unit more than 1", you will damage
the front leveling legs and the rear leveling
wheels.
PRUDENCE
Les roues de nivellement arrière et les pattes
de nivellement avant permettent un réglage
maximal de 25 mm (1 po). Si l’ouverture pour
l’appareil ménager a une hauteur supérieure
à 2,15 m (84-1/2 po), l’installateur doit élever
l’appareil ménager sur une feuille de contre-
plaqué ou des glissières. Il est également possible
d’ajouter des baguettes de finition des placards
sur le haut de l’ouverture afin de la réduire.
Lever l’appareil ménager de plus de 25 mm (1 po)
endommage les pattes de nivellement avant
et les roues de nivellement arrière.
Leveling Leg
Hex Nut Adjusts
Rear Wheels