Filter
Top Products
8
The Problem Solver
Chimney Vent Hood
Questions?
Use this
problem
solver!
PROBLEM POSSIBLE CAUSE
FAN DOES NOT • A fuse may be blown or a circuit breaker tripped. Replace fuse or
OPERATE WHEN reset circuit breaker.
THE SWITCH IS ON
FAN FAILS TO • Fan blade striking the hood shell.
CIRCULATE AIR
• Excessively soiled filter should be checked and corrected before
using the hood again.
FAN OPERATES BUT • Check to be sure the filter is clean. If replacing the filter does not
MOVES AIR SLOWER correct the problem, call for service.
THAN NORMAL
FAN KEEPS GOING • The motor is probably overheating and turning itself off. This can
OFF AND ON be harmful to the motor. Check to be sure the filter is clean. If it
continues to cycle on and off, call for service.
FAN LIGHT IS ON • This is normal and indicates the fan is operating as it should.
OR IS BLINKING