Filter
Top Products
17
Metal marks
and scratches
1. Be careful not to slide pots and pans across
your cooktop. It will leave metal markings
on the cooktop surface.
These marks are removable using the
cleaning cream with a scrub sponge
and/or razor scraper.
2. If pots with a thin overlay of aluminum
or copper are allowed to boil dry, the
overlay may leave black discoloration
on the cooktop.
This should be removed immediately
before heating again or the discoloration
may be permanent.
WARNING: Carefully check the bottom of pans for
roughness that would scratch the cooktop.
Damage from
sugary spills
and melted
plastic
Our testing shows that if you are cooking
high sugar mixtures such as jelly or fudge
and have a spillover, it can cause permanent
damage to the glass surface unless the spillover
is immediately removed.
1. Turn off all surface units affected by the
spillover. Remove hot pans.
2. Wearing an oven mitt:
a. Use the razor scraper to move the spill
to a cool area on the cooktop.
b. Remove the spill with paper towels.
3. Any remaining spillover should be left until
the surface of the cooktop has cooled.
4. Don’t use the surface units again until all of
the residue has been completely removed.
NOTE: If pitting or indentation in the glass surface
has already occurred, the cooktop glass will have to
be replaced. In this case, service will be necessary.
To order Cerama Bryte® cream and the razor
scraper, please call our toll-free number
800-626-2002.
Cerama Bryte® Cream . . . .# WX10X300
Razor Scraper . . . . . . . . . .# WX5X1614
Kit . . . . . . . . . . . . . . . . . . .# WB64X5027
(Kit includes cream and razor scraper)
To Order Parts
Glass Surface – Potential for Permanent Damage