Filter
Top Products
Control Panel
Dishwasher
You can locate
your model
number on the
tub wall just
inside the door.
Throughout this
manual, features
and appearance
may vary from
your model.
6
LOAD SELECTIONS
OPTIONS
STATUS
NORMAL
SENSING
WASHING
RINSING
DRYING
CLEAN
START
RESET
GLASSES
POTS
PANS
CHINA
CRYSTAL
RINSE
& HOLD
POWER
PRESOAK
HI TEMP
RINSE
HEATED
DRY
LOCK
(2 TIMES)
DELAY
START
CleanSensor
2 4 8
1 2 43
Control
Settings
1. The Status
The Status display tells you what's happening while the dishwasher is in operation and also any
malfunctions if they occur. The lights will come ON indicating the sequence of operation the
dishwasher is in.
SENSING Displayed during periods using CLEANSENSOR technology to measure the
amount of soil in the load and decide if another prewash is needed.
WASHING Displayed during prewash and main wash periods.
RINSING Displayed during rinse periods.
DRYING Displayed during HEATED DRY.
CLEAN Displayed when cycle is complete. Light remains ON until door is opened.
2. Load Selections
The light above the selected pad will be ON to indicate which LOAD SELECTION has been
selected.
NORMAL
For loads of everyday dishes, glasses and cookware with medium soils.
POTS PANS For heavily soiled dishes or cookware with dried-on or baked-on soils.
Everyday dishes may be included. This cycle will not remove burned-on
foods.
CHINA
For lightly soiled china and crystal.
CRYSTAL
GLASSES For loads of glassware. Especially good to reduce spotting and filming.
RINSE & HOLD For rinsing partial loads that will be washed later.
Do not use detergent with
this cycle.