GE Monogram ZBD4600 Dishwasher User Manual


 
What is Dishwasher-Safe Care and Cleaning
Clean the outer surface and door jambs with a
lightly dampened cloth. Dry thoroughly. Do not
use abrasives or sharp objects, they can damage
the dishwasher.
The inside usually takes care of itself. Keeping
your rinse agent dispenser filled all the time will give
the tub and inner door of your dishwasher a polished
appearance.
If your dishwasher is left in an unheated place
during the winter, ask a service technician to:
• Cut off electric power to the dishwasher.
Remove fuses or trip circuit breaker.
• Turn off the water supply.
• Disconnect the water inlet line from the water valve.
• Drain water from the inlet line and water valve.
(Use a pan to catch the water.)
• Reconnect the water inlet line to the water valve.
• Pour 1 cup non-toxic antifreeze into the sump.
(Non-toxic antifreeze available at recreational
vehicle stores.)
Not Using Your Dishwasher in Winter? Protect Against Freezing
An air gap is a plumbing device.
It protects your dishwasher against
water backing up into it if a drain
clogs. The air gap is not a part of
the dishwasher. And you may not
even have one. Not all plumbing
codes require air gaps.
Check the air gap any time your
dishwasher isn’t draining well.
If you have an air gap, check it at
least once a month. IT IS NOT
PART OF YOUR DISHWASHER.
IT IS NOT COVERED IN YOUR
WARRANTY.
The air gap is easy to clean.
With most types, first turn off the
dishwasher, then lift off the chrome
cover. Then unscrew the plastic cap
and check for any buildup of grit.
A toothpick makes cleaning easy.
Built-in Dishwashers Often Use an Air Gap. Keep It Clean
TWO TYPES OF AIR GAPS
Keeping Your Dishwasher Filters Clean
The wash arms should be checked on a regular basis to
assure that the spray orifices are clear and unobstructed.
If wash arms require cleaning they are easily removable.
The lower wash arm can be removed by pulling upwards.
The upper wash arm is held in position by a knurled nut.
Clean with water and a stiff bristled brush and replace.
Keeping Your Dishwasher Wash Arms Clean
CARE AND CLEANING
11
Your dishwasher has a filter system comprised of a
central filter and a microfilter. At the end of each wash,
remove the filter from the bottom of the dishwasher and
make sure it is clean.
To check to see if the filter is
clogged or dirty, first remove
the lower wash arm by lifting
it up and off. Turn the center
filter assembly handle
counterclockwise and pull out.
Remove the microfilter
by pulling it down
away from the center
filter assembly. Then
press the tabs on the
inner filter and remove
it also. Clean all filter
parts with water and a
stiff bristled brush.
To replace, line up the dome on
the tube, press down and lock
into place by turning clockwise.
Replace the wash arm.
Tube
Dome