Filter
Top Products
7
Installation
Step
(continued)
Jonung
additional
cooktopto
downdrafi
vent or to
downdrafi~“11
I
Securing
cooktop(s)to
countertop
42)
~ Front of Countertop
Diagram 53.1
“
Remove endcap on side of next cooktop to be joined.
“ Place cooktop next to downdraft vent in cutout.
“ Pre-tap holes in downdraft joiner and endcaps by
- Drive two Phillips head screws into pre-tapped holes
driving supplied screws through holes and then
using Phillips screwdriver bit socket.
backing out before installation. This will facilitate the
“ To install additional downdraft vent or cooktop refer
joining process later on. to “Joining multiple coolitops”.
- Attach downdraftjoiner strip to cooktop.
“ Loosen screws retaining holddown brackets at each
I
end of cooktop. Extend holddown brackets. Tighten
I \\\
screws.
o Drive long screw (two lengths provided) through
bracket until screw pressure against bottom of
=$==
countertop secures cooktop.
Llagram 53.?
53