6
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut
or remove the third (ground) prong from
the power cord. For personal safety, this
appliance must be properly grounded.
The power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall outlet
to minimize the possibility of electric shock
hazard from this appliance.
Have the wall outlet and circuit checked
by a qualified electrician to make sure
the outlet is properly grounded.
Where a standard 2-prong wall outlet is
encountered, it is your personal responsibility
and obligation to have it replaced with
a properly grounded 3-prong wall outlet.
Use of a GFI (Ground Fault Interrupter) is not
recommended for the bar refrigerator with
icemaker.
The appliance should always be plugged into
its own individual electrical outlet which has
a voltage rating that matches the rating
plate. This provides the best performance
and also prevents overloading house wiring
circuits which could cause a fire hazard from
overheated wires.
DO NOT USE AN ADAPTER
PLUG TO CONNECT THE BAR
REFRIGERATOR WITH
ICEMAKER TO A 2-PRONG
OUTLET.
DO NOT USE AN EXTENSION
CORD WITH THIS APPLIANCE.
Never unplug an appliance by pulling on
the power cord. Always grip the plug firmly
and pull straight out from the outlet.
Repair or replace immediately all power
cords that have become frayed or otherwise
damaged. Do not use a cord that shows
cracks or abrasion damage along its length
or at either end.
When moving the appliance, be careful
not to roll over or damage the power cord.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS