Filter
Top Products
15
Installation
Double-Drawer Refrigerator
Install custom drawer panels and handles
1. Open drawers.
2. Remove 2 screws holding trim;
lift trims off. Retain screws.
3. Custom handles of your choice,
supplied by your cabinet maker, must
be installed onto the overlay panels
before they are slid into the trims.
Countersink all screws into the backer
panels. Screws cannot protrude from
the backer panels.
4. Slide overlay panels into the trims.
5. Reinstall the side trims using the trim
screws removed earlier.
6. Place the brushed decorative covers
over the side trim to hide the screw
heads. Ensure side trim is aligned
top-to-bottom and front-to-back.
Snap into place.
6. NOTE: For shipping purposes, the
brushed decorative cover will be
secured to the front of the unit.
Installing
custom 3/4″
drawer panels
and handles
(cont.)
(ZIDI240 model
only)
Handle
Custom
Drawer Panel
Screws Must
Be Countersunk
Into Panel