GE Monogram ZMC1090 Series Microwave Oven User Manual


 
SENSOR POPCORN
The Sensor Popcorn feature is designed to be used
only with prepackaged microwave popcorn weighing
3.0 to 3.5 ounces.
Step 1: Remove the outer wrapper from the
microwave popcorn.
Step 2: Open oven door and place package of
popcorn in the center of the oven floor as directed
by the package instructions. Close oven door.
Step 3: Touch SENSOR POPCORN
pad. No need to touch START, the oven
will start immediately.
After the popcorn sensor
detects steam, the oven
signals and displays
remaining cooking
time needed.
Step 4: When cooking is
completed, the oven
signals and flashes
‘‘End’’. Open the door
and remove the popcorn.
COOK
TIME
POWER
SENSOR
POPCORN
NOTE: Do NOT use the metal shelf with the
Sensor Popcorn program.
Questions and Answers
Q. I opened the door to check on the popcorn and
“Error” appeared on the display. Why?
A. The Sensor Popcorn program first detects steam
and then switches to Micro Cook. If you open the
door while “POP” is displayed, “Error” will appear.
Close the door, touch CLEAR/OFF and begin
again. You may open the door when “End” appears
on display.
Q. Can I use regular popcorn with the Sensor
Popcorn feature in my microwave oven?
A. No. This automatic function is designed to be used
only with prepackaged microwave popcorn.
Q. When I touched the POPCORN pad, the oven
signalled and “HOT” appeared in the display,
and the feature would not operate. Why?
A. If the temperature inside the oven is greater than
200°, the sensor will not operate properly as the oven
does not allow the sensor cooking feature to be used.
SENSOR BEVERAGE
The Sensor Beverage program makes it simple to heat
a cup of hot chocolate or other beverage. Use a cup
that has no metal decoration and is microwave-safe
(refer to the Microwaving Tips section).
Touch SENSOR BEVERAGE pad. No need to touch
START, the oven will start immediately.
The oven will signal and turn off automatically
when finished.
CAUTION: Beverages heated with the Sensor
Beverage feature may be quite hot. Remove the
container with care.
How to Adjust the Sensor Popcorn Program to Provide a Shorter or Longer Cook Time
If your favorite popcorn is not completely popped,
there is a simple adjustment you can make.
Touch the SENSOR
POPCORN pad. (The
oven will start
immediately.) Then touch
number pad 9. A plus
sign will appear on the
display beside the word “POP”. The plus sign
indicates 20 seconds more cooking time is being
provided.
If your favorite popcorn is overcooked, there is a
simple adjustment you can make.
Touch the SENSOR
POPCORN pad. (The
oven will start
immediately.) Then touch
number pad 1. A minus
sign will appear on the
display beside the word “POP”. The minus sign
indicates 20 seconds less cooking time is being
provided.
20