GE Monogram ZMC1090 Series Microwave Oven User Manual


 
YOUR TOUCH CONTROL PANEL
The touch control panel allows you to set the oven controls with the
touch of a finger. It’s designed to be easy to use and understand. With
your new oven, you have several cooking options. In addition to microwave
or convection cooking, you have combination cooking, which uses both
methods. Also sensor microwave cooking (Sensor Cook) and sensor
microwave defrosting (Sensor Defrost), and sensor combination
temperature cooking (Combination Roast). Or you may make your
own programs to suit your own cooking needs.
1. SENSOR POPCORN. Touch this pad to cook
prepackaged microwave popcorn weighing 3.0 to
3.5 ounces. No need to touch START, the oven
will start immediately.
2. SENSOR REHEAT. Touch this pad for quick
reheating of prepared foods. No need to touch
START, the oven will start immediately.
3. AUTO DEFROST. Touch this pad and food
weight, then START. The oven automatically
sets power levels and defrosting time.
4. MICRO COOK. Microwave for a selected
amount of time using automatic Power Level 10
(High).
5. COMBINATION COOK. Touch this pad before
entering desired oven temperature, then cook time
or food temperature. Combination cooking uses
alternating microwave and convection for
maximum speed and browning.
6. CONVECTION COOK. Touch this pad before
entering desired oven temperature, then cook time
or food temperature.
7. EXPRESS COOK. Touch number pads 1 through
5 for 1 to 5 minutes of cooking. No need to touch
START, the oven will start immediately.
8. POWER LEVEL. Touch this pad before entering
another power level number if you want to change
from automatic Power Level 10 (High) for
cooking or Power Level 3 (Low) for defrosting.
9. DELAY START/REMINDER. Allows you to
program your oven to begin cooking at a preset
time of day—up to a 12-hour delay. The Reminder
feature can be used like an alarm clock.
10. START. After all selections are made, touch this
pad to start the oven.
11. DISPLAY. Displays time of day, time or
temperature during cooking functions, doneness
code words, preheat code words, power level
being used, cooking mode and instructions.
12. SENSOR BEVERAGE. Touch this pad to heat
or reheat a beverage. No need to touch START,
the oven will start immediately.
13. SENSOR COOK. Touch this pad, number pad
for desired code number, and START. The oven
automatically microwaves at preprogrammed
power levels and determines the proper amount
of cooking time until the food is done and oven
shuts off.
14. TIME DEFROST. Gentle thawing at automatic
Power Level 3 (Low).
15. TEMP COOK/HOLD. Use the temperature
probe to cook by using a preset temperature.
When internal food temperature reaches 90°F.,
oven shows temperature until preset temperature
is reached and holds temperature for up to 1 hour.
16. COMBINATION ROAST. Insert probe. Touch
this pad (once for Medium, twice for Well), then
START. The oven roasts meat with the automatic
preset program.
17. NUMBER PADS. Touch these pads to program
the microwave.
18. CLOCK DISPLAY ON/OFF. Touch the 0
number pad to turn the clock display on or off.
The Clock Display On/Off feature cannot be used
while a cooking feature is in use.
19. ADD 30 SECONDS. Press this pad for 30
seconds of cook time, to add 30 seconds to the
cook time as it’s counting down, or for an “instant
on” for 30 seconds.
20. MINUTE. Use this with number pads to enter
whole minutes. For example, for 6 minutes touch
6 and MINUTE.
21. CLEAR/OFF. When touched, it stops the oven
and erases all settings except time of day.
22. SOUND LEVEL. Press the SOUND LEVEL pad.
Press number pad 0, 1, 2, or 3 then press START
pad to change the sound level of the oven beeper.
23. KITCHEN TIMER. This feature uses no
microwave energy while it functions as both a
kitchen timer or as a holding period between
defrost and time or temperature cooking.
24. CLOCK. Touch this pad to enter time of day or
check time of day while microwaving. To set
clock, first touch CLOCK pad and then enter time
of day. For example, if time is 1:30, touch number
pads 1, 3, and 0 and ‘‘1:30’’ will appear in display.
Then touch START or CLOCK. If you wish to
reset or change time, simply repeat above process.
8