Filter
Top Products
6
TOW POLE ASSEMBLY
The tow pole assembly is located on the front of the mixer and is used for transport only.
For transport, pull the tow pole assembly out, line up the hold and insert the L-shaped pin
through holes.
When operating the mixer, pull the L-shaped pin out of the hole and push tow pole
assembly all the way in. Line up the holes and insert the L-shaped pin through the holes.
SAFTEY CHAINS
1. Cross chains under the tow pole when connecting the safety hooks to the tow
pole. SEE FIGURE 2
2. Allow enough slack to permit vehicle turning while keeping chains snug enough
under tow pole to prevent pole from contacting the ground in case of
disconnection or hitch failure.
3. Secure safety hooks to appropriate mounting area on tow vehicle.
NOTE: SAFETY CHAIN LENGTH MAY NEED TO BE ALTERED FOR
PROPER CONNECTION TO TOW VEHICLE. REPOSITION HOOKS, DO NOT
CUT CHAIN.